> >

BreakBrake17 Transfer ~Hawaii~ custom

I decided to paint this BreakBrake17 Transfer due to major rusting on areas of the frame. This frame was originally raw. I chose the color brass to match the BB17 logo on the fork.

Frame:
BreakBrake17 Transfer 50cm

Fork/Headset:
BreakBrake17 Transfer steel

Crankset/Bottom Bracket:
Shimano UN55

Pedals:
Shimano r540

Drivetrain/Cog/Chainring/Chain:
Dura-ace 16t/Sugino Zen 46t/Pearl Izumi

Handlebars/Stem:
Nitto B123 steel/Bontrager SSR 80mm 10 degrees

Saddle/Seatpost:
Fizik Arione WingFlex/Unknown 27.2

Front Wheel/Hub/Tire:
Sun Cr18 polished/Dura-Ace HB-7600/Bontrager T1

Rear Wheel/Hub/Tire:
Sun Cr18 polished/Dura-Ace HB-7600/Bontrager T1

Accessories:
Campagnolo crank bolts

Added by Campagnyolo. Last updated about 9 years ago.

8 Comments

JSTEWART304

JSTEWART304 says:

Such a rad build

Posted about 9 years ago

igobackwardsHNL

igobackwardsHNL says:

Love the essay !!!!!!!

Posted about 9 years ago

igobackwardsHNL

igobackwardsHNL says:

and non-hayn ratio

Posted about 9 years ago

Blitz_BNR34

Blitz_BNR34 says:

Swaggy bike! Reppin Rich Gang!

Posted about 9 years ago

Magpul808

Magpul808 says:

Agree!

Posted about 9 years ago

outofstep

outofstep says:

Looks like you can probably get a longer stem.
80mm seems way too short if the top tube is shorter than usual. Also, should consider road drops...those track drops aren't really useful for street riding, and they hella uncomfortable!

Posted about 9 years ago

outofstep

outofstep says:

But all in all...looks good

Posted about 9 years ago

Campagnyolo

Campagnyolo says:

Thanks i'll keep that in mind

Posted about 9 years ago