Well preserved early nineties Cinelli MTB. Not going to change much parts wise just a new cockpit and new tires.
Frame:
Cinelli Argentovivo / Columbus Cyber / 1991
Fork/Headset:
Rock Shox Quadra 5 / Onza Mongo III / 1 1/8"
Crankset/Bottom Bracket:
Shimano Deore LX / Shimano
Pedals:
Flat
Drivetrain/Cog/Chainring/Chain:
Shimano Deore LX / 3 X 8 Speed
Derailleurs/Shifters:
Shimano Deore LX / Shimano Deore LX
Saddle/Seatpost:
Selle Italia Flite / Purple / 27.2
Brakes:
Shimano Deore LX
Front Wheel/Hub/Tire:
HED MTB / Shimano Deore LX / DMR Supermoto
Rear Wheel/Hub/Tire:
HED MTB / Shimano Deore LX / DMR Supermoto
Bike History
Click a link below to see past stages of this bike.
Current Stage Info:
New wheels and shifters along with some anodized parts.
Added by Carabo. Last updated about 5 years ago.
9 Comments
Picked up one of these frames a few months ago and have had trouble finding a headset that will fit. Are you able to link yours?
Posted almost 5 years ago
I didn't have to order anything particularly special, it's a standard 1 1/8" threadless headset. If your fork steerer is threaded you should be getting a threaded 1 1/8" headset. You can get those new or better as an new old stock part of off Ebay.
Posted almost 5 years ago
I had tried just a generic FSA 1 1/8" threadless headset, but the races didn't fit into the headtube, the headtube was too large in diameter. I was wondering if it was an internal headset but that doesn't seem the case. So off to my LBS I go. Thanks for the info!
Posted almost 5 years ago
Hmm too large. Sounds like your frame needs a 1 1/4" headset but best to have the LBS have a look. It's probably a different generation Argentovivo frame from mine.
Posted almost 5 years ago
Photos
Fredd says:
so good
Posted almost 4 years ago