> >

Viner Special Professional Pista

VINER was founded in 1947 in Pistoia, a small town approx 30 miles northwest from Florence, by Mr. Viviano Nerozzi. The brand name is just a contraction of his first and second name VI-NER. Gipiemme was founded in Milan in 1964 as a high quality machine shop. Their name is the initials ‘GPM’ pronounced as a word. It has been said that GPM stands for "Gran Premio della Montagna", the high points on mountain stages of the Giro d’Italia. 3T was originally called Tecnologia del Tubo Torinese (Turin Tube Technology), taking its name from the city of Turin, where it was founded in 1961 by Mario Dedioniggi.

Frame:
Viner pista 54cm

Fork/Headset:
Viner/Campagnolo C-Record 1st gen

Crankset/Bottom Bracket:
Campagnolo C-Record 1st gen, 50t/Campagnolo C-Record,

Pedals:
Campagnolo C-Record/Toe clips Campagnolo C-Record/Toe straps Patebury

Drivetrain/Cog/Chainring/Chain:
Sram PC1

Handlebars/Stem:
Cinelli 2A/Cinelli 65

Saddle/Seatpost:
3ttt /Campagnolo C-Record

Front Wheel/Hub/Tire:
Campagnolo C-Record/Veloflex Record

Rear Wheel/Hub/Tire:
Campagnolo C-Record

Bike History

Click a link below to see past stages of this bike.

  1. Initial
  2. Viner 2.0
  3. Green&Yellow
  4. Corsa Record

Added by das_spoon. Last updated over 8 years ago.

55 Comments

Thor

Thor says:

Absof*cki*nglutely great!

Posted over 5 years ago

ocklarock

ocklarock says:

your machines are artistic

Posted over 8 years ago

grangeyard

grangeyard says:

<3

Posted over 8 years ago

vp1337

vp1337 says:

just wow.

Posted over 8 years ago

kobe

kobe says:

very nice build sir!!

Posted over 8 years ago

das_spoon

das_spoon says:

Thank you! do my best)

Posted over 8 years ago

kenzo1979

kenzo1979 says:

Love the original set up- perfect selection of parts. Lovely!

Posted about 9 years ago

zippy2012

zippy2012 says:

Simply gorgeous.

Posted almost 10 years ago

das_spoon

das_spoon says:

i try to do my best)

Posted almost 10 years ago

router

router says:

Бомба!

Posted almost 10 years ago

rexzxh

rexzxh says:

Love the all silver/chrome look! need a c record headset to finish the build;-P!

Posted about 10 years ago

das_spoon

das_spoon says:

You are completely right my friend) but stack height of exist headset don't allow install c-record.
Anyway i already found another beautiful made Viner fork with stars on flat crown and will install c-record soon)

Posted about 10 years ago

rexzxh

rexzxh says:

Wow! Sounds perfect! Looking forward to see the FINAL build XD`` Pursuit for perfection!

Posted about 10 years ago

das_spoon

das_spoon says:

And thank you for inspiration! Your first version of Bishop track it was, you know) Now the weather in Moscow is so good and i alredy open a bicycle season, so welcome and let's ride!)

Posted about 10 years ago

rexzxh

rexzxh says:

That is a huge compliment buddy``` actually I pretty much like the raw Bishop as well,but the steel tubes got to be covered up with paint so maybe I went a little bit further;-P Anyway the martini stripes looks pretty sexy in my eyes.
It's getting warmer everyday here in China too,wish one day I could bring my bike to Moscow for the ride.
Don't hesitate to give me a shout when you are around in Shanghai

Posted about 10 years ago

strange

strange says:

beautiful frame, beautiful bike. very very good job.

Posted about 10 years ago

covenelite13

covenelite13 says:

Holy campy parts! Gorgeous bike!

Posted over 10 years ago

das_spoon

das_spoon says:

C-Record one of my favorite groupsets ever. Thanks!

Posted over 10 years ago

thisisdish

thisisdish says:

what a wonderful viner! im in love with this bike :)

Posted over 10 years ago

das_spoon

das_spoon says:

Me too!)

Posted over 10 years ago

MGear4817

MGear4817 says:

Great looking bike and wonderful photography. I see the salt water made the appropriate impression on people. Glad to know you got it off the bike as soon as you could. I was thinking the same thing.

Posted over 10 years ago

das_spoon

das_spoon says:

Hi! I'm not a photographer at all and may be just my passion to this bike makes these pictures not so bad)

Posted over 10 years ago

MGear4817

MGear4817 says:

Who makes that rear cog? Is that campy? It's pretty awesome

Posted over 10 years ago

das_spoon

das_spoon says:

it is Tempracog. From Japan.
http://tempracycle.com/?mode=grp&amp;gi...

Posted over 10 years ago

SillyGooseCookie

SillyGooseCookie says:

NOOOOO THOSE HUBS ARE OPEN BEARING!!!!!! you can't get water in them, especially not SALT WATER!!! :,( whyyyyyyy

Posted over 10 years ago

das_spoon

das_spoon says:

don't worry. it was an accident. The same day i regrease everything.
take it easy)

Posted over 10 years ago

SillyGooseCookie

SillyGooseCookie says:

ok that's good. It's such a perfect bike I wouldn't want anything bad to happen to it

Posted over 10 years ago

das_spoon

das_spoon says:

usually i'm very careful with my bikes. thanks for worries anyway, i appreciate.

Posted over 10 years ago

ridingfixed

ridingfixed says:

whats with the headset on this, i've never seen one like it

Posted over 10 years ago

das_spoon

das_spoon says:

this is gipiemme special steel headset. here is detailed pictures http://www.lfgss.com/thread119287.html

Posted over 10 years ago

stevendesmedt

stevendesmedt says:

super viner pista

Posted over 10 years ago

das_spoon

das_spoon says:

Groupset is already changed to C-Record. Looks much more better

Posted over 10 years ago

CUMBOT

CUMBOT says:

... aced it...

Posted over 10 years ago

fixedgearphil

fixedgearphil says:

Your Viner is by far one of the most beautiful bikes around here!

Posted over 10 years ago

das_spoon

das_spoon says:

glad to hear) thank you!

Posted over 10 years ago

Clownshoes

Clownshoes says:

This bike is PERFECTION. Good job mate

Posted over 10 years ago

das_spoon

das_spoon says:

Viner is really great framset, unexpectedly for me. Very fast, light and well controlled. And looking good also

Posted over 10 years ago

Clownshoes

Clownshoes says:

I'm building one up right now with full Dura Ace 7600 and other NJS parts :)

Posted over 10 years ago

das_spoon

das_spoon says:

great! let me know when it will be finished, i want to see the result)

Posted over 10 years ago

Clownshoes

Clownshoes says:

It's going to be impossible to match the cleanliness of your Viner mate ;)

Posted over 10 years ago

das_spoon

das_spoon says:

Great! Now i want to make Viner more aero-style. you can see some process and components on my instagram http://instagram.com/das_spoon

Posted over 10 years ago

JustinDeang

JustinDeang says:

G R E A T !

Posted over 10 years ago

das_spoon

das_spoon says:

Y E A H !

Posted over 10 years ago

Noypi

Noypi says:

This is Beautiful!

Posted over 10 years ago

das_spoon

das_spoon says:

i hope so)

Posted over 10 years ago

strange

strange says:

sweet bike.

Posted over 10 years ago

das_spoon

das_spoon says:

Thank's!

Posted over 10 years ago

wastingaway

wastingaway says:

Lucky wife and lucky you too because she obviously has some long legs ;)

Posted almost 11 years ago

das_spoon

das_spoon says:

yes she has)

but what about bike?)))

Posted almost 11 years ago

wastingaway

wastingaway says:

Perfect bike ;)

Posted almost 11 years ago

tinj

tinj says:

She's a bute'. One sweet setup you got here.

Posted almost 11 years ago

SillyGooseCookie

SillyGooseCookie says:

love it!

Posted almost 11 years ago

Patrick47

Patrick47 says:

Yes!

Posted almost 11 years ago

das_spoon

das_spoon says:

Yes! Yes! YES!

Posted almost 11 years ago

MoonK_Bicycle

MoonK_Bicycle says:

Your Wife? :O This is Awesome

Posted almost 11 years ago

das_spoon

das_spoon says:

my wife, right)

Thank's!

Posted almost 11 years ago