> >

Python TR-f11

Bought it on Black friday i had been looking for this frame for 1 year!!!.

Frame:
Python TR-f11 53 cm (54,5)

Fork/Headset:
Python track fork and fsa headset

Crankset/Bottom Bracket:
Miche primato 165 mm and shimano bb

Pedals:
Shimano SPD-sl

Drivetrain/Cog/Chainring/Chain:
48/17 under 15 gearing in Denmark izumi gold black 1/2

Derailleurs/Shifters:
No no no no no no

Handlebars/Stem:
Zipp sl-88 deda zero 2

Saddle/Seatpost:
Prologo nago evo ttr

Brakes:
NO NO NO NO NO NO

Front Wheel/Hub/Tire:
Viper track wheel vittoria pista 19 mm

Rear Wheel/Hub/Tire:
Viper track wheel vittoria pista 19mm

More Info:
this bike is the same as cumbots and William3k

Bike History

Click a link below to see past stages of this bike.

  1. Initial
  2. Stage 1 frame arrived!
  3. Stage 2 Almost done
  4. Done but upgrades coming up!
  5. Final!

Added by Razzortheviper. Last updated almost 10 years ago.

23 Comments

Stritberg

Stritberg says:

If you ever feel like selling this amazing frame. Please contact me :-) Simply amazing

Posted about 9 years ago

Razzortheviper

Razzortheviper says:

if you still need it im selling it :)

Posted almost 8 years ago

CUMBOT

CUMBOT says:

... hey, you made it and found another axman! ... and it turned out just beautiful... congrats, man!

Posted over 9 years ago

Razzortheviper

Razzortheviper says:

Thank you very much :) and it absolutely fantastic it handles great as you probably know already :). but im a bit tempted to paint it matte black..... Do you think it would look good?

Posted over 9 years ago

CUMBOT

CUMBOT says:

... well, i think you can't go wrong with matte black but keep the modelname and some of the other decals in glossy black or dark gray... ;)
http://www.bike24.de/i/p/8/2/22628_00_d...

Posted over 9 years ago

CvH

CvH says:

Herre flot cykel! Fedt at se nogle danske rammer herinde. :-D

Posted over 9 years ago

Atombomb

Atombomb says:

Holy moly

Posted almost 10 years ago

William3k

William3k says:

I have some left over zipp bars (Sl classic bend). The ones on my bike (changed the to shallow). Don't know what shipping would cost but I would give them away cheap to support your build.

Write me a pm if you're interested.

Posted about 10 years ago

Razzortheviper

Razzortheviper says:

Sorry but i already ordered some zipp bars but the reason i bought the traditional bend bars was because of your bike it looks so damn cool ;)

Posted about 10 years ago

William3k

William3k says:

I switched to the shallow bend because i have them on the road and really like it.
The old zipp bar in the picture was marked as 42 but was more of a 44 (was an old model) the new ones i have are more like 40.
The 88 will be a good bar for the track, i liked the long reach.

Posted about 10 years ago

sloman

sloman says:

Those bars look evil(in a good way lol).

Posted about 10 years ago

Razzortheviper

Razzortheviper says:

Yeah but the bar tape sucks and the bars are pretty uncomfortable. but they do look cool and they will be changed out with zipps sl-88 after xmas :)

Posted about 10 years ago

sloman

sloman says:

If you build a lot of bikes,an adjustable stem is a great thing to add to the tool box. Damn threadless forks are one cut,right or wrong. Then use the size stem that works. Cheers.

Posted about 10 years ago

Razzortheviper

Razzortheviper says:

The bars are uncomfortable because of the bend they have. The reach and drop are pretty pertfect ;)

Posted about 10 years ago

Karl

Karl says:

Flot cykel! Glæder mig til at se den bygget - er misundelig på carbon, er vant til alu og stål på min pinarello og masi

Posted about 10 years ago

Razzortheviper

Razzortheviper says:

Jo tak jeg har lige sat mig ned og er næsten færdig med den mangler lige krank og få skåret forgaffel ned. Jeg har lidt problemer med mit crown race (jeg ved ikke hvad det hedder på dansk) men jeg har banket det lidt på plads men kan nu ikke få det længere ned hvor det skal sidde. Har du nogle tips eller noget?

Posted about 10 years ago

Karl

Karl says:

Altså dit headset? :) Jeg tror umiddelbart man skal bruge et bestemt værktøj til det... Jeg fik det hvert fald gjort da jeg hentede min Masi i New York - min pinarello kom samlet så der ved jeg det ikke. :( Men han brugte noget der lignede en blanding mellem en enorm proptrækker og en meget stor skruetrækker :D

Posted about 10 years ago

Razzortheviper

Razzortheviper says:

Nå øv. så må den vel til cykelhandleren men tak ;)

Posted about 10 years ago

sloman

sloman says:

Nice piece. Bet you name it Monty(or maybe your not an old codger like me.). Hope you have a good enough Christmas to build it.

Posted about 10 years ago

Razzortheviper

Razzortheviper says:

Ha did you notice in the background on the cardboard it says: cobra ;) by the way its the box it came in.

Posted about 10 years ago

Tibor

Tibor says:

Looking forward to the build! Where did you buy the frame ?

Posted about 10 years ago

Razzortheviper

Razzortheviper says:

Thank you i bought it from pythons site www.pythonpro.dk and counting on i Will get some parts/money for parts in Christmas gift and then it Will be done by new year

Posted about 10 years ago

Razzortheviper

Razzortheviper says:

But it was black friday special

Posted about 10 years ago