I have a pair of SRAM Omniums for sale, use but still good. Few scuffs from pants, and one not that major scuff from curbing blah blah blah, pics aren't that good since I took it at like 3AM
3T Seat post is not cracked in the least bit, paint chipping from switching parts over all the time but like I said, no cracks. Cut a bit off the end with a pipe cutter
Cranks 150$
Seat post $50
Local meet up or pick up Los Angeles/Alhambra
3T Seat post is not cracked in the least bit, paint chipping from switching parts over all the time but like I said, no cracks. Cut a bit off the end with a pipe cutter
Cranks 150$
Seat post $50
Local meet up or pick up Los Angeles/Alhambra
Attached Photos:
how long's the seat post? And what diameter?
Diameter is 27.2, and id need to measure the length when I get home
paint chips?
it's bare carbon with an overcoat...
it's bare carbon with an overcoat...
Probably the branding on the clear. Shit comes off too easy!
The coats thinner than a piece of paper give or take actual branding too, you can scratch it off with your nails once there's a little spot that had it rough
Anyway, there's 8" of seatpost left, not including the clamp rise also. So give or take 9.5~10" top to bottom
Anyway, there's 8" of seatpost left, not including the clamp rise also. So give or take 9.5~10" top to bottom
Replies aren't allowed because this topic is closed.