Shimano Ultegra 6800 Crankset - 50X34 - 172.5mm - ~200 miles - $150
Shimano 105 5700 Carbon SPD-SL Pedals - $50
3T Ergonova Pro Handlebars - 44cm - well used - $20
Thomson X2 Stem - 10 degree - 110mm - $50
ENVE Road 2.0 Fork - 43mm rake - $200
Shimano Dura-Ace Brake Cable Set - BC9000 - Black - $30
THESE PRICES DO NOT INCLUDE SHIPPING TO YOUR PROVIDED ADDRESS
-thanks
Shimano 105 5700 Carbon SPD-SL Pedals - $50
3T Ergonova Pro Handlebars - 44cm - well used - $20
Thomson X2 Stem - 10 degree - 110mm - $50
ENVE Road 2.0 Fork - 43mm rake - $200
Shimano Dura-Ace Brake Cable Set - BC9000 - Black - $30
THESE PRICES DO NOT INCLUDE SHIPPING TO YOUR PROVIDED ADDRESS
-thanks
Attached Photos:
Would the crankset fit in an 80s bottom bracket i.e. not BB30? I see it's an integrated bottom bracket, yes?
Correct me if I'm wrong, but I don't think Shimano makes BB30 cranksets. Everything they sell uses a threaded BB. If you see Shimano inside a BB30 shell, you can assume there's a shim involved.
All you would need is a threaded external cup bottom bracket. Assuming your frame is english threaded with road width, you could buy my CK bb and this crankset for full compatibility with each other, assuming the rest of your drivetrain is 11-speed (but I'm sure 10-speed would work with this crank).
For BB compatibility, you just need an external cup BB with a 24mm inner diameter for a Shimano crankset spindle.
For BB compatibility, you just need an external cup BB with a 24mm inner diameter for a Shimano crankset spindle.
Awesome, thanks for all the info. I'm attempting to retrofit newer components onto an older road bike, this could work out. Will check on some dimensions and perhaps get back to you with a sale!
Replies aren't allowed because this topic is closed.