Home
> >

Cinelli Tutto all-around singlespeed

This is a logical continuation of my previous bike. I wanted to build an all-around adventure singlespeed on a steel frame, with flip-flop hub (to ride fixed as well) and fat tires. Cinelli Tutto seemed to be a perfect frame for this, it's made from nice Columbus Cromor tubeset, has clearence for up to approx. 40mm tires, eyelets for bottle cages and front rack, etc. Belt system opening and internal cable routing are nice bonuses too. I wanted it to be as simple and reliable as possible. Wheels are simple and strong. Freewheel was always a weak spot of my previous singlespeed, so here I decided to put a super-reliable White Industries ENO freewheel. The main concern of this build was the reliability, not the weight, speed or style (however I like how it looks).

Frame:
Cinelli Tutto 2018

Fork/Headset:
Cinelli Tutto / Cane Creek 40 Series

Crankset/Bottom Bracket:
Sram Omnium / Sram GXP

Pedals:
Shimano PD-M520

Drivetrain/Cog/Chainring/Chain:
White Industries ENO Freewheel 17t / Miche Primato / Sram Omnium 48t / Shimano CN-NX10 Singlespeed Chain

Derailleurs/Shifters:

Handlebars/Stem:
PRO LT OS Compact / ControlTech Newton

Saddle/Seatpost:
Selle Italia Q-bik / Origin8

Brakes:
TRP CX 8.4

Front Wheel/Hub/Tire:
H Plus Son Archetype rim with DT Swiss Revolution spokes / Miche Primato Track Hub / Continental GatorHardshell 32mm

Rear Wheel/Hub/Tire:
H Plus Son Archetype rim with DT Swiss Revolution spokes / Miche Primato Flip-Flop Track Hub / Continental GatorHardshell 32mm

More Info:
More on this bike here: https://poohitan.com/p/new-bike-tutto (in Ukrainian)

Added by poohitan. Last updated 4 months ago.

11 Comments

Nash

Nash says:

Finally got around to snapping some photos. Added the Tutto to my profile. Very happy with the bike so far, it's a blast to ride.

Posted 2 months ago

Nash

Nash says:

Really nice build! I'm going to buy one of these frames soon. Could you tell me the diameter of the seatpost clamp?

Posted 4 months ago

poohitan

poohitan says:

Hi. Seatpost diameter is 27.2 mm.

Wish you a nice build too :).
I will be glad to see it when it's ready, please post a link here if you don't mind.

Posted 4 months ago

Nash

Nash says:

Thanks. I meant the inner diameter of the clamp which pinches the seat tube. It's going to be a bit bigger than 27.2.

Posted 4 months ago

poohitan

poohitan says:

Ahh, ok:). Will measure and post it bit later today.
But clamp is included with frameset, so you don't need to worry on how to choose the right diameter.

Posted 4 months ago

Nash

Nash says:

I need to purchase one with a cable stop to run a cantilever setup :).

Posted 4 months ago

Nash

Nash says:

Also, how is that headset? I was going to use the same one.

Posted 4 months ago

poohitan

poohitan says:

I built this bike only 2 months ago, but so far it looks great and very reliable. I'm riding everyday, city, cobbles, gravel, rain showers — no issues.

Posted 4 months ago

poohitan

poohitan says:

Hey mate, been busy. Just measured the clamp: when it's not tightened, it's inner diameter is 29.8 mm.
Outer seat tube diameter is 28.8 mm, I guess this measurment is more valuable.

Posted 4 months ago

Nash

Nash says:

Thanks buddy! I just placed the order for the frameset. I'll post a link in a few weeks when the initial build is done.

Posted 4 months ago

poohitan

poohitan says:

Can't wait to check it out :)

Posted 4 months ago