Home
> >

White Knuckles

I have a soft spot for silver components

Frame:
EAI Bareknuckle 48cm (White)

Fork/Headset:
EAI Bareknuckle Fork // Phil Wood 1 1/8

Crankset/Bottom Bracket:
Sugino 75 165mm // Phil Wood 110.5mm ISO

Pedals:
Time ATAC

Drivetrain/Cog/Chainring/Chain:
44RN 47T 6061 // Izumi Jet Black/Gold

Derailleurs/Shifters:
Cadence Control

Handlebars/Stem:
Ritchey Classic Mountain Bar 2014 (560mm) // Ritchey Classic 2014 (130mm)

Saddle/Seatpost:
Selle Italia Flite 1990 // Ritchey Classic 2014

Brakes:
Death

Front Wheel/Hub/Tire:
H+Son TB14 // Phil Wood Low Flange 32H // Grand Prix 4-Season // DT Competition Spokes, 3X Cross

Rear Wheel/Hub/Tire:
H+Son TB14 // Phil Wood Low Flange 32H Single Sided Fixed // Gator Hardshell // DT Competition Spokes, 3X Cross

Accessories:
ODI Lock-On Grips

More Info:
Caged Out, Blinged Out

Bike History

Click a link below to see past stages of this bike.

  1. Initial
  2. Freshly Pressed
  3. Hibernation
  4. Post Summer
  5. Really Phil'ing It
  6. Dream Status Acquired
  7. Yeehaw

Current Stage Info:

🤠

Added by coreymeath. Last updated about 2 months ago.

20 Comments

Jehu

Jehu says:

You got all the ritchey classic!

Posted 3 months ago

coreymeath

coreymeath says:

Yes finally! Might swap for a shorter stem (if I can find one).

Posted 3 months ago

RobertState

RobertState says:

you replaced all thomson screws with titanium screws

Posted 7 months ago

coreymeath

coreymeath says:

Replaced the stem bolts because the 3mm bolts were stripped. Titanium ones ended up being too short, so I took bolts off an old Thomson Elite Stem. 3mm bolts on a stem is a dumb idea IMO.

Posted 7 months ago

Scrodzilla

Scrodzilla says:

Bare Knuckle Army!

Posted 8 months ago

coreymeath

coreymeath says:

Yes! Will be picking up some low flange Phils from you for a new silver wheelset!

Posted 8 months ago

Kamicrazy

Kamicrazy says:

Cheers BK bro

Posted about 1 year ago

coreymeath

coreymeath says:

Thanks man! Your bikes are even nicer!

Posted over 1 year ago

GeorgeWashingtonMobsDeep

GeorgeWashingtonMobsDeep says:

This build did not disappoint. So clean!

Posted over 1 year ago

ManlyApparatus

ManlyApparatus says:

No baretape pls so you truly whiteknuckle

Posted over 1 year ago

coreymeath

coreymeath says:

Haven’t decided on the bars yet, most probably some silver compact drops.

Posted over 1 year ago

Jehu

Jehu says:

This will be good

Posted over 1 year ago

coreymeath

coreymeath says:

This will be very good!

Posted over 1 year ago

Veganbikes

Veganbikes says:

It's nice but I would go Phil headset and Phil Cranks for the Phull Phil Phun.

Posted over 1 year ago

coreymeath

coreymeath says:

If my budget was unlimited, I would have done this for sure.

Posted over 1 year ago

poopypat

poopypat says:

#allphileverything

Posted over 1 year ago

Veganbikes

Veganbikes says:

If my budget was unlimited I would give Richard Sachs a huge chunk of money for him to build me a frame, fork and cockpit and then Phil Wood everything else

Posted over 1 year ago

coreymeath

coreymeath says:

Phil headset is actually on it's way. A step closer now.

Posted 8 months ago

coreymeath

coreymeath says:

Thanks man! Gonna get the headset fitted this week but will only have the drivetrain completed by next year probably.

Posted over 1 year ago

poopypat

poopypat says:

so far so good. ;D

Posted over 1 year ago