Updated photos, thanks Coomer
Frame:
2014 Cannondale CAAD 10 (52cm)
Crankset/Bottom Bracket:
Cannondale Hollowgram SiSL2 w/ Quarq
Pedals:
Look Keo Blade Ti (16nm)
Drivetrain/Cog/Chainring/Chain:
Shimano Ultegra 6800 (53-39) / Dura Ace (11-28)
Derailleurs/Shifters:
Shimano Ultegra 6870
Saddle/Seatpost:
Fizik Antares 00 / Cannondale C1
Brakes:
Shimano Ultegra 6800
Front Wheel/Hub/Tire:
H Plus Son TB14 / Ultegra 6800 / Vittoria Zaffiro (25mm)
Rear Wheel/Hub/Tire:
H Plus Son TB14 / Ultegra 6800 / Vittoria Zaffiro (25mm)
Accessories:
STS Cover, King Ti Cages, Jagwire Elite Link
More Info:
Huge thanks to McCully Bike, and IT&B.
Bike History
Click a link below to see past stages of this bike.
Added by joserheo. Last updated over 7 years ago.
As of over 7 years ago, joserheo has indicated that they no longer own this bike.
144 Comments
Excellent rim choice with the H Plus. Wouldn't race on them, but they're supper plush from what I hear.
Posted almost 8 years ago
sweet bike. i have those bars, but i havent found a really clean solution for mounting an outfront garmin. tips?
Posted over 8 years ago
PM'd.
Best bet is a barfly because the mount can flex since the bars are oval on the tops
Posted over 8 years ago
ay breh wanna go on a bicycle ride with muffinman and riceboy?
Posted over 8 years ago
But I don't ride I just take pictures of bikes for likes and karma???
Posted over 8 years ago
Always down to ride if you're nearby. Riverside/Arcadia isn't far from me.
Posted over 8 years ago
nice build. Zipp 404 seems to be custom made for that frame. enjoy!
Posted almost 9 years ago
Looking so good.. Can you tell me what length is the stem on your monocurve please ?
Posted almost 9 years ago
That is an absolutely fantastic looking bike. Certainly the best looking Caad Series I've ever seen. Great job.
Posted about 9 years ago
Wow! What a build! Love the neatness and the stealthiness. Did not expect the caad10 to look this good in this color. Kudos.
Posted about 9 years ago
it's so sad that a bike like this replaced the CIOCC so fast.
Posted about 9 years ago
Having old track bikes on the front page all the time gets boring and this build is dialed. I don't see the problem
Posted about 9 years ago
hey man, awesome bike, where did you get the small frame parts like the front brake cable stop and the covers for the front shift cable stops?
I'm trying a similar build (not as fancy) and am looking for those parts.
Posted about 9 years ago
Very rarely do I ever see the Ritchey bar/stem combo, a very unique addition. Props!
Posted about 9 years ago
Where's the matching Ritchey post :(
Posted about 9 years ago
Lol, I was waiting for someone to nitpick at that. It's a unnecessary upgrade atm, maybe in the future.
Posted about 9 years ago
Very nice! Cables are super clean, I appreciate how clean the bike is too, super cool bar+stem, love the CAAD 10 in general! Did you install that band that holds the B Junction correctly?
Posted about 9 years ago
Much appreciated. Junction B is actually in the down tube, near the bb. I think you're talking about Junction A (under the stem). In this case, it is installed wrong because I wasn't given the proper pieces. I'll post some updated pictures with it fixed in a bit.
Posted about 9 years ago
Whoops! Lol, wasn't too sure about what I was calling what. You're totally right, and yea, I figured! Sounds good, love the bike!
Posted about 9 years ago
any modifications to the frame to make it di2 compatible ?
Posted over 9 years ago
None needed. Frame comes with replaceable stops for the downtube and chain stay, however not one for the seat tube (just a standard e-wire grommet)
Posted over 9 years ago
Unsure as I got it for free at an LBS. Should be the 6mm but I'd order both just in case. CC works well with returns anyways
Posted over 9 years ago
Dang, this is a nice Caad10! I was close to getting this same frameset/color but ended up with my R3. Looking good!
Posted over 9 years ago
That Di2 must be butter. I should be almost done with my 9 soon!
Posted over 9 years ago
It's flawless, you'll love 6800. I'm stoked, I'll eventually build up a 9!
Posted over 9 years ago
Is that a slammystem cap or the rubber part that came with the Caad?
Posted over 9 years ago
Nice bike. Why did you size down to 52cm? I may be getting one soon but I ride a 54cm Allez. My friend who is similar height had a 52cm also.
Posted over 9 years ago
I sized down because I needed a lower stack height in comparison to my 54. A smaller bike also feels better.
Posted over 9 years ago
Sweet build- how long did it take to get the frameset? FedEx damaged my Fuji and I've been thinking when/if they pony up I might get a CAAD10 or Allez smartweld frameset and switch the parts over.
Posted almost 10 years ago
Depends where you're located and frameset availability. I ordered my frameset through an LBS, and since I'm located in Hawaii, it took a bit longer for shipping. As for availability, it depends on color and size, but check your shop to see what's available. eBay works too!
Posted almost 10 years ago
Why did you get rid of the EVO and move to the CAAD10? Also, hows the ride quality between the 2? I've always wondered if I should've went with the EVO over the CAAD10
Posted almost 10 years ago
Multiple reasons: I wanted a smaller size (from 54 to 52), and something more lower in cost in terms of replacement if crashed. The CAAD is a bit harsher than the Evo but definitely stiffer. In terms of bang for your buck, the CAAD is definitely worth more than the Evo.
Posted almost 10 years ago
Just stunning! I almost got this same colorway but thought it was too plain looking. You have completely changed my mind.
Posted almost 10 years ago
Thanks man! I initially ordered the green one, and my LBS received the grey one. I didn't mind the mistake, it ended up being pretty sweet
Posted almost 10 years ago
Oh man, this is the first time I've seen that frame look good, thanks to the wheels; holy shit it looks good.
Posted almost 10 years ago
Saw this on WW, great build!
Posted almost 10 years ago
Why did you end up going back to aluminum? After the evo I think it'd be hard to go back :)
Posted almost 10 years ago
I actually started with an Evo, then "downgraded" to a CAAD as my first aluminum bike. It just came down to having a smarter investment in terms of replacement if necessary.
Posted almost 10 years ago
Such a nice bike! I really like the black behind black on the zipp parts. It gives the feeling of an understatement. My only question is, Why has the stem the white logo? Otherwise just perfect IMHO :)
Posted almost 10 years ago
Thanks! The silver on the stem actually matches quite well. It's not mine, I'm borrowing it from a friend.
Posted almost 10 years ago
I also think it matches well. Was just wondering :) May I ask you how long you have been training with the Quarq power meter and if you have been making a fast progress? I'm thinking of getting the Stages PM or a new Wheelset.
Posted almost 10 years ago
I have owned 2 quarq cranksets alittle over a year. The power readings definitely help your training of you stick to a good schedule. I have encountered a few obstacles that put me off my bike for awhile multiple times which screwed up training. Other than that, it's a great investment. Stages is a good PM.
Posted almost 10 years ago
ugh... HOT!
Posted almost 10 years ago
thanks!.. thinking about slamming the stem and throwing on some pink bartape.. just to experiment ;)
Posted almost 10 years ago
SO SICK!!!
Posted almost 10 years ago
i first saw it on weightweenies and didn't hesitate to share!
Posted almost 10 years ago
Really loving the shape of CAAD10. The colour is amazing and its probably the first set of Zipps with black decals that I really like! Maybe gum walls on tubs?
Posted almost 10 years ago
I would have used gumwalls, but I got the tires through an LBS for super cheap. Maybe my next set?
Posted almost 10 years ago
My new favourite CAAD on the web, really love that paintjob! it seems like a lot of people are getting rid of their SuperSix for it's metal counterpart.
Posted almost 10 years ago
Are you always rolling on 404's or do you have a set of clinchers as well?
Posted almost 10 years ago
Beat me to it!!! You've got the first of this colorway on here. Looks great!
Posted almost 10 years ago
Photos
Lance says:
Digging them tb14s!! Does the anodized finish on the brake line wear off?
Posted almost 7 years ago